Alle (3802)

€1 689.00

Can be used flexibly as a monitor, front or satellite system 2.000 Watt Crown DriveCore amplifier for maximum performance, high operational reliability and low power consumption Sharc-DSP, very fast processor for extensive signal processing, long delay, V5 and custom settings High continuous sound pressure with low distortion and faithful reproduction through original JBL components with DCD woofer and neodymium tweeter driver HiQnet connection, easy control and monitoring via network and/or SRX800 app The JBL SRX815P is a very powerful active front and monitor speaker. It is suitable for ambitious bands, mobile DJ's, professional PA rental companies as well as fixed installations.The integrated Crown DriveCore bi-amp power amp module includes two amplifiers and a fast Sharc DSP with all controller functions. In addition to the V5 factory presets, 50 custom programs can also be stored. Control or monitoring is via HiQnet network (AudioArchitect, Motion Control, etc.) or the SRX800 app (iOS and Android).All inputs and outputs as well as power and network sockets are located on the power amplifier module. The display and three encoders can be used to set important parameters on the speaker itself. The housing is made of sturdy multiplex wood and covered with a DuraFlex paint. Due to the stand flange, the M10 mounting points as well as the cabinet angle, it is suitable as a front PA and monitor system. In combination with a JBL SRX800 series subwoofer, the JBL SRX815P can also be operated as a satellite. Technical Data Speaker: 15" woofer, 1.5" tweeter (3" coil) Frequency response: 36 Hz -21 kHz (-10 dB) Max. Sound pressure: 137 dB Power: 2,000 watts (peak) Dispersion angle: 90°x50 400 MHz Sharc DSP 20 parametric EQs Max. 2 seconds delay 50 user presets Dimensions: 691 x 458 x 478 mm (HxWxD) Weight: 28,6 kg Levertijd 2 a 3 werkdagen

€1 998.00

Precise and powerful midrange and speech reproduction 2.000-watt Crown DriveCore amplifier for maximum power, high operational reliability and low power consumption Sharc DSP, very fast processor for extensive signal processing, long delay, V5 and custom settings Original JBL components with DCD woofer and neodymium tweeter driver produce high continuous sound pressure with low distortion and faithful reproduction HiQnet connection, easy control and monitoring via network and/or SRX800 app The JBL SRX835P is a very powerful, active 3-way front speaker with horn-loaded midrange/tweeter. It is suitable for ambitious bands, mobile DJ's, professional PA rental companies as well as fixed installations.The integrated Crown DriveCore bi-amp power amp module includes two amplifiers and a fast Sharc DSP with all controller functions. In addition to the V5 factory presets, 50 custom programs can also be stored. Control or monitoring is via HiQnet network (AudioArchitect, Motion Control, etc.) or the SRX800 app (iOS and Android).All inputs and outputs as well as power and network sockets are located on the power amplifier module. Via the display and 3 encoders, important parameters can be set on the speaker itself. The housing is made of sturdy multiplex wood and covered with and DuraFlex paint. The equipment includes a stand flange and M10 mounting points. The side cabinet angle allows horizontal clustering of multiple JBL SRX835P. Technical Data Speaker: 15" woofer, 6" midrange 1.5" tweeter (3" coil) Frequency response: 33 Hz -21 kHz (-10 dB) Max. Sound pressure: 137 dB Power: 2,000 watts (peak) Dispersion angle: 60°x40 400 MHz Sharc DSP 20 parametric EQs Max. 2 seconds delay 50 user presets Dimensions: 984 x 544 x 476 mm (HxWxD) Weight: 38,6 kg Levertijd 2 a 3 werkdagen

€1 999.00

Ideal woofer complement for SRX812P, SRX815P and SRX835P 1.000 watt Crown DriveCore amplifier for maximum power, high reliability and low power consumption Sharc DSP, very fast processor for extensive signal processing, long delay, V5 and custom settings Original JBL components with DCD woofer and neodymium tweeter driver produce high continuous sound pressure with low distortion and faithful reproduction HiQnet connection, easy control and monitoring via network and/or SRX800 app The JBL SRX818SP is a very powerful 18" subwoofer. It is suitable for ambitious bands, mobile DJ's, professional PA rental companies and fixed installations.The integrated Crown DriveCore power amplifier module delivers 1,000 watts. A fast Sharc DSP realizes all controller functions. In addition to the V5 factory presets, 50 custom programs can also be stored. The control or monitoring is done via HiQnet network (AudioArchitect, Motion Control, etc.) or the JBL SRX800 app (iOS and Android).All inputs and outputs as well as power and network socket are located on the power amplifier module. Important parameters can be set on the speaker itself via the display and 3 encoders. The housing is made of sturdy multiplex wood and covered with and DuraFlex paint. The equipment includes an M20 stand flange, M10 mounting points, 4 handles and preparation for roller mounting. Technical Data Speaker: 18" DCD woofer (3" coil) Frequency response: 29 Hz -150 Hz (-10 dB) Max. Sound pressure: 135 dB Power: 1,000 watts (peak) 400 MHz Sharc DSP 20 parametric EQs Max. 2 seconds delay 50 user presets Dimensions: 575 x 684 x 683 mm (HxWxD) Weight: 39,5 kg Levertijd 2 a 3 werkdagen

€1 385.00

Excellent sound and high continuous load capacity High-quality driver and woofer with dual voice coils provide a balanced frequency response and optimal impulse behavior Excellent workmanship and first-class quality guarantee durable operation Optimal protection of the speakers due to full front grilles Sturdy housing with scratch and shock resistant paint finish The JBL SRX812 is a multifunctional PA speaker that can be used as both a front system and stage monitor. Typical users are PA rental companies, professional bands or fixed installations with high level requirements. As a front PA system, the JBL SRX812 offers a balanced, harmonic frequency response that is also suitable for full-range playback. For strong bass-driven reproduction, the JBL SRX818S subwoofer is a suitable complement.The JBL SRX812 is equipped with the new JBL 2272 woofer, which has a very powerful and precise drive due to its dual voice coil. The equally powerful 2432H tweeter driver with 3" voice coil and 90° x 50° horn impresses with clear highs and a wide frequency range. This is especially important for the assertive reproduction as a stage monitor.Depending on the application, the operating mode can be configured from 'passive' to 'bi-amp'. The connection is made via one of the two NL4 connectors, which are also configurable in the assignment from 1+/- to 2+/-. This allows full utilization of 4-pin Speakon cables as well as easy, mix-up free system cabling. The JBL SRX812 can be placed on a stand as well as flown. For this purpose, the speaker has 12 M10 mounting points. The cabinet is made of 18 mm multiplex and is covered with JBL's DuraFlex paint.Presets for different DSPs and power amps such as Crown XTi, I-Tech HD or dbx DriveRack 360 are available via the Audio Architect software. The JBL SRX 812 is also available as an active loudspeaker under the model name JBL SRX812P (powered) with an integrated DSP and amp module. Technical Data Speaker: 12" woofer, 1.5" tweeter Frequency response: 41 Hz - 20 kHz (-10 dB) Max. Sound pressure: 135 dB (peak) Power handling: 800/1,600/3,200 watts (continuous/program/peak power handling) Dispersion angle: 90°x50 Dimensions: 638 x 415 x 429 mm (HxWxD) Weight: 24,9 kg Levertijd 2 a 3 werkdagen

€1 279.00

Excellent sound and high continuous load capacity High-quality driver and woofer with dual voice coils provide a balanced frequency response and optimal impulse behavior Excellent workmanship and first-class quality guarantee durable operation Optimal protection of the speakers due to full front grilles Sturdy housing with scratch and shock resistant paint finish The JBL SRX815 is a multifunctional PA speaker that can be used as both a front system and stage monitor. Typical users are PA rental companies, professional bands or fixed installations with high level requirements. As a front PA system, the SRX815 offers a balanced, harmonic frequency response that is also suitable for full-range reproduction. For strong bass emphasis, the JBL SRX818S or JBL SRX828S subwoofer is a suitable complement.The JBL SRX815 is equipped with the new JBL 2275H 15" woofer, which has a very powerful and precise drive due to its dual voice coil. The equally powerful 2432H tweeter driver with 3" voice coil and 90° x 50° horn impresses with clear highs and a wide frequency range. This is especially important for the assertive reproduction as a stage monitor.Depending on the application, the operating mode can be configured from 'passive' to 'bi-amp'. The connection is made via one of the two NL4 connectors, which are also configurable in the assignment from 1+/- to 2+/-. This allows full utilization of 4pin Speakon cables as well as easy, mix-up free system cabling. The JBL SRX815 can be placed on a stand as well as flown. For this purpose, the speaker has 12 M10 mounting points. The cabinet is made of 18mm multiplex and is covered with JBL's DuraFlex paint.Presets for different DSPs and power amplifiers such as Crown XTi, I-Tech HD or dbx DriveRack 360 are available via the Audio Architect software. The JBL SRX 815 is also available as an active loudspeaker under the model name JBL SRX815P (powered) with an integrated DSP and amp module. Technical Data Speaker: 15" woofer, 1.5" tweeter Frequency response: 41 Hz - 20 kHz (-10 dB) Max. Sound pressure: 136 dB (peak) Power handling: 800/1,600/3,200 watts (continuous/program/peak power handling) Dispersion angle: 90°x50° Dimensions: 691 x 458 x 478 mm (HxWxD) Weight: 25.9 kg Levertijd Onbekend

€1 998.00

Excellent sound and high continuous load capacity High-quality driver and woofer with dual voice coils provide a balanced frequency response and optimal impulse behavior Excellent workmanship and first-class quality guarantee durable operation Optimal protection of the speakers due to full front grilles Sturdy housing with scratch and shock resistant paint finish

€1 829.00

Powerful bass and high continuous power handling High-quality woofer with dual voice coils provides excellent impulse response High continuous sound pressure with low distortion and faithful reproduction Optimal protection of the loudspeaker due to full front grille Sturdy housing with scratch and shock resistant paint finish The JBL SRX818S is a compact 18" subwoofer with high power handling. Typical users are PA rental companies, professional bands or fixed installations with high level requirements.The JBL SRX818S is equipped with the new JBL 2279H 18" woofer, which has a very powerful and precise drive due to its dual voice coil.The connection is made via one of the two NL4 connectors, which are also configurable in the assignment from 1+/- to 2+/-. This allows the full utilization of 4-pin Speakon cables and a simple, confusion-proof system wiring with appropriate tops.The cabinet is made of 18 mm multiplex and is covered with JBL's DuraFlex paint. With the M20 screw flange, it lends itself as a stand base for mounting tops. The 4x handles make it very easy to handle. On the back side there are 4x 4 drive-in nuts as preparation for roller mounting.Presets (also Cardioid) for different DSPs and power amps like Crown XTi, I-Tech HD or dbx DriveRack 360 are available via the Audio Architect software. The JBL SRX818S is also available as an active loudspeaker under the model name JBL SRX818SP (powered) with an integrated DSP and amp module. Technical Data Speaker: 18" woofer (2279H) Frequency response: 28 Hz - 150 Hz (-10 dB) Max. Sound pressure: 135 dB (peak) Power handling: 600/1,200/2,400 watts (continuous/program/peak power handling) Dimensions: 575 x 683 x 684 mm (HxWxD) Weight: 35.4 kg Levertijd 2 a 3 werkdagen

€1 829.00

Powerful bass and high continuous power handling High-quality woofers with dual voice coils provide excellent impulse response High continuous sound pressure with low distortion and faithful reproduction Optimal protection of the loudspeaker due to full front grille Sturdy housing with scratch and shock resistant paint finish The JBL SRX828S is a high-power 2x 18" subwoofer with very high output. Typical users are PA rental companies, professional bands or fixed installations with high level requirements.The JBL SRX828S is equipped with two new JBL 2279H 18" woofers, which have a very powerful and precise drive due to their dual voice coil.The connection is made via one of the two NL4 connectors, which are configurable in the assignment from 1+/- to 2+/-. This allows the full utilization of 4-pin Speakon cables and a simple, confusion-proof system wiring with appropriate tops.The cabinet is made of 18 mm multiplex and is covered with JBL's DuraFlex paint. The JBL SRX828S subwoofer has 8x handles. On the back there are 4x 4 drive-in nuts in preparation for roller mounting.Presets (also Cardioid) for different DSPs and power amps like Crown XTi, I-Tech HD or dbx DriveRack 360 are available via the Audio Architect software. The JBL SRX818S is also available as an active loudspeaker under the model name JBL SRX818SP (powered) with an integrated DSP and amp module. Technical Data Loudspeaker: 2x 18" woofer (2279H) Frequency response: 30 Hz - 150 Hz (-10 dB) Impedance: 4 Ohm Max. Sound pressure: 141 dB (peak) Power handling: 1200/2,400/4,800 watts (continuous/program/peak power handling) Dimensions: 574 x 1205 x 681 mm (HxWxD) Weight: 62.1 kg Levertijd 2 a 3 werkdagen

€24.50

Kenmerken: 1. Ondersteuning van A2DP / AVRCP, gratis configuratiebestand, FM-uitzending 2. Met FM-functie, kan automatisch zoeken naar radio-uitzendingen 3. Internationale geavanceerde draadloze chip- en circuitontwerptechnologie ter ondersteuning van alle draadloze apparaten 4. Uitgerust met high-fidelity luidsprekers om een helder en helder geluid te garanderen 5. Ondersteuning van Micro SD-kaart en USB-kaart, speel audio in MP3-formaat 6. De draadloze werkafstand is 10 meter 7. Met de AUX-kabel kunt u rechtstreeks externe apparaten aansluiten, zoals tablets / tv's / mobiele telefoons 8. Als de Bluetooth-modus niet is verbonden, wordt deze automatisch na 30 minuten uitgeschakeld Product specificaties: 1. Bluetooth-versie: V5.0 2. Bluetooth-afstand: binnen 10 meter 3. Uitgangsvermogen: 2x5W 4. Frequentiebereik: 120Hz-20kHz 5. Signaal-ruisverhouding: â ‰ § 90dB 6. Vervormingspercentage: <0,5% 7. Batterijcapaciteit: 3,7 V / 1200 mAh 8. Oplaadtijd: 2-3 uur 9. Speeltijd: 5-6 uur 10. Waterdicht cijfer: IPX5 11. Maat uit één stuk: 182 * 73,5 * 69,2 MM 12. Productgewicht: 413 gram Paklijst: Bluetooth-luidspreker x 1 Oplaadkabel x 1 Audiokabel x 1 Gebruikershandleiding x 1 Levertijd: Op voorraad in Den Haag

€16.30

Deze American DJ Kool Fog rookvloeistof is speciaal gemaakt voor low foggers van American DJ. Deze kan van vijf liter zorgt ervoor dat de rookmachine rook van hoge kwaliteit produceert die laag bij de grond blijft hangen. Specificaties American DJ Kool Fog rookvloeistof voor lage rook 5L Blijft langer hangen dan normale vloeistof Geschikt voor: Mister Kool I en II, Entour Chill Inhoud: 5 liter Levertijd: op voorraad in Den Haag

€275.95

DJLicht Flightcase 2in1 voor waterdichte 750W sparkular Speciale flightcase voor 2 waterdichte DJLicht sparkulars. Levertijd 2 a 3 werkdagen

€3 798.00

Specificaties Kanalen: 4 Mono ingangen: 1x Mic (XLR & jack 6.3mm) Stereo ingangen: 4x Line (RCA), 4x Phono (RCA), 4x Digitaal (coax) USB ingang: USB-C Effectprocessor(s): Delay, Tape Echo, Echo Verb, Reverb, Shimmer en HPF (High-Pass Filter) Stereo ingang EQ: High / Mid / Low Effect send/return: 2x Send, 2x Return Voeding: Intern Gewicht: 9.5 Kg Afmetingen (hxbxd): 119.9 x 429.2 × 331.0 mm Kenmerk A: Send/Return & Master Insert Kenmerk B: Serato DVS-ready Kenmerk C: Lockable Power Cord Kenmerk D: Firmware Update Manager Kenmerk E: 32 RF preselectiefilters Kenmerk F: Auto power off HS code: 85272120 EAN/Barcode: 4573201242914 Levertijd 2 a 3 werkdagen