SYNQ PE-2400 2x 1200Wrms / 4ohm

€836.00

LD Systems DEEP2 2400 X PA Power Amplifier 2 x 1200 W 2 ohm The DP2400X is the newest member of the DEEP2 family of power amplifiers. In response to requests by many customers, we expanded this series with a new, powerful amplifier that is also compatible with 2-ohm systems. The key specifications are 2 x 1200 W at 2 ohms, 2 x 950 W at 4 ohms and 2 x 600 W at 8 ohms RMS power. Like the other power amplifiers in the DEEP2 series, the DP2400X uses class H circuitry powered by a conventional power supply. The protective circuitry is also identical with that used in the DEEP2 series. It also follows the DEEP2 design in its integration of two temperature-dependent two step cooling fans. One special feature is a switchable 12 dB low-cut and/or 12 dB low-pass filter adjustable from 25 Hz to 150 Hz on both channels. This makes it possible to use the DP2400X as a bass amp or even realize a powerful bi-amping system. With the filters switched off, it becomes a conventional 2 channel power amp. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 2 Ohms) 2 x 1200 W Rated ouput power (1kHz @ 4 Ohms) 2 x 950 W Rated ouput power (1kHz @ 8 Ohms) 2 x 600 W Rated ouput power (1 kHz @ 4 Ohms, bridged) 2200 W Rated ouput power (1kHz @ 8 Ohms, bridged) 1800 W Output circuitry Class H Frequency response 20 - 20000 Total Harmonic Distortion (THD) < 0.1 % Signal-to-noise ratio 106 dB Damping factor (20Hz-500Hz @8ohm) > 450 Crosstalk >76 dB Gain 39 dB Input sensitivity 0.775 V Protection circuits clip limiter, DC protection, Short circuit, thermal overload Controls 2 x highpass/lowpass (switchable), 2 x volume, bridge/stereo mode selector, ground lift, mains switch (on/off) Indicators level, Limit, Power, Protect (protection circuit engaged), Signal Loudspeaker outputs 2 Speaker output connections Speakon compatible, Terminal posts Cooling highly efficient, automatic Power supply transformer Operating voltage 230 V AC / 50-60 Hz Weight 17,6 kg Features Volex mains socket Levertijd 2 a 3 werkdagen

€346.00

LD Systems XS 200 PA Power Amplifier Class D 2 x 100 W 4 Ohms LD Systems XS200 Power Amplifier The XS200 is an extremely compact, dependable Class D power amplifier with an output of 100W per channel at 4 ohms and a transmission range of 20Hz – 20kHz. With just 1U and a weight of 3kg, it is conceived for all professional applications in which ease of transport or space is important, whether mobile, in installations or at home, since no fan is required. The XS200 is protected against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. Slide switches on the rear panel let you select the mode of operation and gain and activate the limiter and the ground-lift function for eliminating ground loop hum. LEDs indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS200 impresses with its high dynamics, impulse fidelity, and transparent sound. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 4 Ohms) 2 x 100 W Rated ouput power (1kHz @ 8 Ohms) 2 x 50 W Rated ouput power (1kHz @ 8 Ohms, bridged) 200 W Output circuitry Class D Frequency response 20 - 20000 Total Harmonic Distortion (THD) < 0.1 % Gain 30 dB / 26 dB / 24 dB dB Input sensitivity 0.77 V / 1.1 V / 1.4 V (passed) V Protection circuits DC, over-current, Short circuit, soft start, thermal overload Controls Gain, ground lift, limiter, Mode, On / Off, volume Indicators clip, Mode, Power, Protect (protection circuit engaged), Signal Line inputs 2 Line input connectors 6.3 mm jack, RCA Loudspeaker outputs 2 Speaker output connections Speakon compatible, Terminal posts Power supply Switching power supply Power consumption @ full load 240 W Operating voltage 115 V AC / 230 V AC (switchable) Width 482 mm Height 44 mm Depth 244 mm Weight 3 kg Levertijd 2 a 3 werkdagen

€499.00

D class high performance 4 channels amplifier, 4 x400 w/8ohms , 4 x 640w/4 ohms, XLR input, speakon output, led VU meter, temperature control fans, frequency responce 20Hz - 34Kz,6kg. Technical Specifications 8 ohms Stereo Power: 4x 400 W. 4 ohms Stereo Power: 4x 640 W. Input connetor: XLR female. Input impedance: 20k ohms balanced. Input Sensitivity: 0.77V. Input CMRR: >80dB. Output connector: Speakon. Hum&Noise: >112dB. Damping Factor: >1000 @ 8 ohms. THD: <0.1% (20Hz-20kHz 1W). Frequency Response: 20Hz - 34KHz, (+0/-0.3dB, 1W/8ohms). Level control: front level meter, from negative infinity to 0dB. Cooling variable speed fans, front to rear airflow. Power Requirements: AC voltage 180 / 240V, 50 / 60Hz Amplifier dimensions: 88mm X 488mm X 438mm. Packing dimensions 150mm X 600mm X 550mm. Net weight(kg): 5,7 Gross weight(kg): 6,6. Levertijd 2 a 3 werkdagen

€705.00

D class high performance 4 channels amplifier, 4 x900 w/8ohms , 4 x1800w/4 ohms, XLR input, speakon output, led VU meter, temperature control fans, frequency responce 20Hz - 34Kz,adjustable VPL, 10kg. Technical Specifications 8 ohms Stereo Power: 4x 900W. 4 ohms Stereo Power: 4x 1800W. Input connetor XLR: female. Input impedance: 20k ohms balanced. Input Sensitivity: 0.77V 1.44V. Input CMRR: >80dB. Output: connector Speakon. Hum&Noise: >112dB. Damping Factor: >1000 @ 8 ohms. THD: <0.1% (20Hz-20kHz 1W). Frequency Response: 20Hz-34KHz,(+0/-0.3dB, 1W/8ohms). Level control: front level meter, from negative infinity to 0dB. Cooling: variable speed fans, front to rear airflow. Power Requirements: AC voltage 180-240V 50-60Hz. Amplifier dimensions: 88mm x 490mm x 415mm. Packing dimensions: 150mm x 600mm x 520mm. Net weight(kg): 12.7 Gross weight(kg): 15.9 Levertijd 2 a 3 werkdagen