LD Systems VIBZ 24 DC 24 Channel Mixing Console with DFX and Compressor

€325.00

LD Systems ZONE 622 19" 2-Zone Mixer 1U The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations. The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface. The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622. Product type Mixers Type Installations Number of Zones 2 (Master, Zone) Type stereo Installation Height 1 U Total Input Channels 8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH) Frequency response 20 - 40000 Microphone channels 2 (with phantom power 12 V) Microphone Channel Connections 6.3 mm stereo jack (balanced) Microphone channel controls 1 x EQ Hi, 1 x EQ Low, 1 x Talk Over Damp, 1 x Talk Over Level, Gain, On / Off Microphone Channels Display Elements On-LED Microphone Channels Input Impedance 4 kOhm Microphone Channels Input Sensitivity 6.1 mV Microphone Channels THD 0.08% Line / Microphone Channels 2 Line / microphone input connectors 2 x RCA, 3.5 mm stereo jack (input 1), 6.3 mm stereo jack (balanced) Line / microphone channel controls Cue, level, mic/lline, Trim Line / Microphone Display Elements Cue-LED, Signa-LED Line Channels 3 Line input connectors Input 3-4: 2 x RCA, Input 5: 2 x RCA + USB Line Channel Controls Cue, level, Trim Line Channel Display Elements Cue-LED, Signa-LED Line Channel Input Impedance 4 kOhm Line Channels Input Sensitivity 1.5 V Line Channels THD 0.03% input sensitivity AUX/Line 3 V FOH Channels 1 FOH Input Connections 6.3 mm stereo jack (2 x balanced) FOH Input Controls Cue, level FOH Input Display Elements Cue-LED, Signa-LED Line outputs 3 (Master - Stereo, Zone - Mono, Rec - Stereo) Output Connectors Master 6.3 mm stereo jack (2 x balanced), RCA (x2), Terminal block Levertijd 2 a 3 werkdagen

€265.95

LD Systems VIBZ 8 DC 8 Channel Mixing Console with DFX and Compressor 8-channel mixer with 100 digital effects presets 4 microphone channels and 3 stereo line inputs Effective 3-band EQ Sliding adjustable compressor Master, Monitor and headphone outputs Securely fastening external power supply Product type Mixers Type Live Channels 8 AUX / Effects Send Channels 1 AUX / Effects Send Connectors 6.3 mm stereo jack unbalanced Stereo AUX Return Channels 1 x stereo Stereo AUX Return Connectors 2 x 6.3 mm TRS Stereo Tape Out Channel 1 x stereo Stereo Tape Out Connectors 2 x RCA (Cinch) Stereo Tape In Channel 1 x stereo Stereo Tape In Connenctors 2 x RCA (Cinch) Unbalanced stereo Main Outputs 1 Unbalanced stereo Main Output Connections 6.3 mm TRS Unbalanced Stereo Main Out Impedance 120 Ohm(s) Max. Unbalanced Stereo Main Out Level 20 dBu Stereo Control Room Out 1 Stereo Control Room Out Connectors 6.3 mm TRS Headphones ouput 1 Headphones outputs 6.3 mm TRS Digital Effects Processor Yes, 24-bit AD/DA Resolution Number of Presets 100 Footswitch Connector DFX Mute 6.3 mm TRS Main section controls DFX Mute Schalter, DFX Presets, DFX To Main Volume, Master Volume, Phantom Power, Phones / Control Room Volume, Stereo Return Volume Indicators 8-segment Level Meter, Channel Peak, DFX Peak / Mute, Phantom Power, Power Power supply 18V DC - 1 A, External PSU, 230 V Width 265 mm Height 78 mm Depth 352 mm Weight 2,3 kg Levertijd: Half april 2024

€545.00

LD Systems ZONE 624 19" 4-Zone Mixer 3U LD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote- controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas. The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface. The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing. Product type Mixers Type Installations Number of Zones 4 (Master, Zone A-C) Type stereo Installation Height 3 U Total Input Channels 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line Frequency response 20 - 40000 Microphone channels 2 (with phantom power 12 V) Microphone Channel Connections 6.3 mm stereo jack (2 x balanced), XLR Microphone channel controls 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1x EQ Mid, 2 x gain, 2x On/Off Microphone Channels Display Elements On-LED Microphone Channels Input Impedance 4 kOhm Microphone Channels Input Sensitivity 4.5 mV Microphone Channels THD 0.08 % Line Channels 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line 4: Line, Input 6: Line/FOH Line input connectors input 2, 4 5: 2 x RCA, Input 1: 2 x RCA + 3.5 mm stereo jack, input 3: 2 x RCA + USB, input 6: 4 x RCA + 2 x 6.3 mm jack Line Channel Controls 2x Phono/Line, AUX enable, Cue, FOH On, Gain, level Line Channel Display Elements Cue-LED, Signal/0 dB-LED Line Channel Input Impedance (Phono) 50 kOhm, 6 kOhm Line Channels Input Sensitivity (Phono) 25m V, 2.1 V Line Channels THD (Phono) 0.05%, 0.02% Levertijd 2 a 3 werkdagen

€217.00

LD Systems MS 828 19" 8-Channel Splitter/Mixer LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8 The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications. The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions. TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment. Product type Mixers Type Installations Channels 8 Mono input channels, line 6 Mono line input connectors 2 x 6.3 mm TS Mono line input type Electronically balanced Stereo Line Input Channels 1 Stereo Line Input Connectors 2 x XLR Stereo Line Input Type Electronically balanced Input impedance (balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s) Max. input level + 21 dBu Nominal working level -10 dBV - +4 dBu Mono output channels 6 Mono output connectors 2 x 6.3 mm TS Mono output type Electronically balanced Stereo output channels 1 Stereo output connectors 1 x XLR Stereo output type Electronically balanced Output impedance (balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s) Max. output level +22 dBu Frequency response 5 - 40000 THD 0.0008 % S/N Ratio 85 dB Controls Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6 Indicators In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power Operating voltage 220 V AC - 240 V AC, 50-60 Hz Mains connector IEC power connector Power consumption 15 W Fuse T 315 mAL, AC 250V Width 483 mm Height 44.5 mm Depth 216 mm Weight 3 kg Accessories (included) Power cord Levertijd 2 a 3 werkdagen