Audio (832)

€423.00

LD Systems XS 700 PA Power Amplifier Class D 2 x 350 W 4 Ohms LD Systems XS700 Power Amplifier The XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations. The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 4 Ohms) 2 x 350 W Rated ouput power (1kHz @ 8 Ohms) 2 x 200 W Rated ouput power (1kHz @ 8 Ohms, bridged) 700 W Output circuitry Class D Frequency response 20 - 20000 Total Harmonic Distortion (THD) < 0.1 % Gain 36 dB / 27 dB / 31 dB dB Input sensitivity 0.6 V / 1.7 V / 1.1 V V Protection circuits DC, over-current, Short circuit, soft start, thermal overload Controls Gain, ground lift, limiter, Mode, On / Off, volume Indicators clip, Mode, Power, Protect (protection circuit engaged), Signal Line inputs 2 Line input connectors 6.3 mm jack, RCA Loudspeaker outputs 2 Speaker output connections Speakon compatible, Terminal posts Cooling low-noise fan Power supply Switching power supply Power consumption @ full load 860 Operating voltage 115 V AC / 230 V AC (switchable) Width 482 mm Height 44 mm Depth 244 mm Weight 3,4 kg Levertijd 2 a 3 werkdagen

€484.00

LD Systems DEEP2 600 PA Power Amplifier 2 x 300 W 2 Ohms The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 2 Ohms) 2 x 300 W Rated ouput power (1kHz @ 4 Ohms) 2 x 400 W Rated ouput power (1kHz @ 8 Ohms) 2 x 300 W Rated ouput power (1 kHz @ 4 Ohms, bridged) 600 W Rated ouput power (1kHz @ 8 Ohms, bridged) 800 W Output circuitry Class H Frequency response 20 - 20000 Total Harmonic Distortion (THD) < 0.1 % Signal-to-noise ratio 105 dB Damping factor (20Hz-500Hz @8ohm) >400 Crosstalk >80 dB Gain 35 dB Input sensitivity 0.75 V Protection circuits clip limiter, DC protection, Short circuit, thermal overload Controls 2 x volume, bridge/stereo mode selector, ground lift, mains switch (on/off) Indicators level, Limit, Power, Protect (protection circuit engaged), Signal Loudspeaker outputs 2 Speaker output connections Speakon compatible, Terminal posts Cooling highly efficient, automatic Power supply transformer Operating voltage 230 V AC / 50-60 Hz Weight 12,8 kg Features Volex mains socket Levertijd 2 a 3 werkdagen

€387.00

LD Systems XS 400 PA Power Amplifier Class D 2 x 200 W 4 Ohms LD Systems XS400 Power Amplifier The XS400 is an extremely compact, dependable Class D power amplifier with an output of 200W per channel at 4 ohms 400W in 8-ohm bridged mode, and a wide transmission range of 20Hz – 20kHz. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The XS400, at 1U and a weight of 3.4kg, is conceived for all professional applications in which ease of transport or space is important, whether mobile or in permanent installations. The XS400 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The transparent sound of the XS400 stands out with high dynamics and impulse fidelity. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 4 Ohms) 2 x 200 W Rated ouput power (1kHz @ 8 Ohms) 2 x 100 W Rated ouput power (1kHz @ 8 Ohms, bridged) 400 W Output circuitry Class D Frequency response 20 - 20000 Total Harmonic Distortion (THD) < 0.1 % Gain 32 dB / 26 dB / 28 dB dB Input sensitivity 0.68 V / 1.4 V / 1.2 V (not passed) V Protection circuits DC, over-current, Short circuit, soft start, thermal overload Controls Gain, ground lift, limiter, Mode, On / Off, volume Indicators clip, Mode, Power, Protect (protection circuit engaged), Signal Line inputs 2 Line input connectors 6.3 mm jack, RCA Loudspeaker outputs 2 Speaker output connections Speakon compatible, Terminal posts Cooling low-noise fan Power supply Switching power supply Power consumption @ full load 470 W Operating voltage 115 V AC / 230 V AC (switchable) Width 482 mm Height 44 mm Depth 244 mm Weight 3,4 kg Levertijd 2 a 3 werkdagen

€346.00

LD Systems XS 200 PA Power Amplifier Class D 2 x 100 W 4 Ohms LD Systems XS200 Power Amplifier The XS200 is an extremely compact, dependable Class D power amplifier with an output of 100W per channel at 4 ohms and a transmission range of 20Hz – 20kHz. With just 1U and a weight of 3kg, it is conceived for all professional applications in which ease of transport or space is important, whether mobile, in installations or at home, since no fan is required. The XS200 is protected against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. Slide switches on the rear panel let you select the mode of operation and gain and activate the limiter and the ground-lift function for eliminating ground loop hum. LEDs indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS200 impresses with its high dynamics, impulse fidelity, and transparent sound. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 4 Ohms) 2 x 100 W Rated ouput power (1kHz @ 8 Ohms) 2 x 50 W Rated ouput power (1kHz @ 8 Ohms, bridged) 200 W Output circuitry Class D Frequency response 20 - 20000 Total Harmonic Distortion (THD) < 0.1 % Gain 30 dB / 26 dB / 24 dB dB Input sensitivity 0.77 V / 1.1 V / 1.4 V (passed) V Protection circuits DC, over-current, Short circuit, soft start, thermal overload Controls Gain, ground lift, limiter, Mode, On / Off, volume Indicators clip, Mode, Power, Protect (protection circuit engaged), Signal Line inputs 2 Line input connectors 6.3 mm jack, RCA Loudspeaker outputs 2 Speaker output connections Speakon compatible, Terminal posts Power supply Switching power supply Power consumption @ full load 240 W Operating voltage 115 V AC / 230 V AC (switchable) Width 482 mm Height 44 mm Depth 244 mm Weight 3 kg Levertijd 2 a 3 werkdagen

€399.00

LD Systems VIBZ 12 DC 12 Channel Mixing Console with DFX and Compressor 12-channel mixer with 6 microphone channels 4 stereo line inputs Effective 3-band EQ 2 stereo channels with 2-band EQ Sliding adjustable compressor Digital Effects Section with 100 Presets Master, Monitor, Groups and headphone outputs Built in power supply Product type Mixers Type Live Channels 12 AUX / Effects Send Channels 2 AUX / Effects Send Connectors 6.3 mm TRS Stereo AUX Return Channels 1 x stereo Stereo AUX Return Connectors 6.3 mm TRS Stereo Tape Out Channel 1 x stereo Stereo Tape Out Connectors 2 x RCA (Cinch) Stereo Tape In Channel 1 x stereo Stereo Tape In Connenctors 2 x RCA (Cinch) Balanced Stereo Main Out 1 Balanced Stereo Main Out Connectors XLR Balanced Stereo Main Out Impedance 120 Ohm(s) Max. Balanced Stereo Main Out Level 23 dBu Stereo Control Room Out 1 Stereo Control Room Out Connectors 6.3 mm TRS Headphones ouput 1 Headphones outputs 6.3 mm TRS Digital Effects Processor Yes, 24-bit AD/DA Resolution Number of Presets 100 Footswitch Connector DFX Mute 6.3 mm TRS Main section controls 2-track Assignment (Main, Contr. Room), 2-track In Volume, AUX 2 Send Volume, CTRL / Phones assignment (Main/Group 1-2), DFX Mute Schalter, DFX TO AUX Volume, DFX To Main Volume, Group 1-2 assignment to Main MIX, Group 1-2 Volume, Master Volume, PFL, Phantom Power, Power, presets, Stereo Return to AUX Volume, Stereo Return to MAIN Volume, Volume Control CTRL / Phones Indicators DFX Peak, DFX TO MAIN, PFL, Phantom Power, Power Power supply 100 V AC - 240 V AC, 50 - 60 Hz Width 350 mm Height 98 mm Depth 440 mm Weight 4,3 kg Levertijd 2 a 3 werkdagen

€662.00

LD Systems VIBZ 24 DC 24 Channel Mixing Console with DFX and Compressor 24-channel mixer with 16 mono and 4 stereo channels Balanced mic and line inputs 3-band EQ with semi-parametric mids 4 aux sends, 2 pre or post fader switchable 8 mono channels with inserts and compressor Channel routing, mute and PFL switches 48V phantom power 4 subgroups with individual outputs 24-bit digital effects and global 7-band graphic EQ Balanced and unbalanced main outputs Control room and headphone outputs 10 Hz – 45 kHz frequency response integrates 16 bit/48 kHz USB audio interface 3-band EQ with semi-parametric midrange regulating on mono channels 4-band EQ on stereo channels Product type Mixers Type Home-Recording, Live Channels 24 AUX / Effects Send Channels 4 AUX / Effects Send Connectors 6.3 mm TS Stereo AUX Return Channels 1 Group Out 4 Group Out Connectors 4 x 6,3mm TRS Balanced Stereo Main Out 1 Balanced Stereo Main Out Connectors XLR Unbalanced stereo Main Outputs 1 Unbalanced stereo Main Output Connections 2 x 6.3 mm TS Main-Insert Inputs 1 Main-Insert Input Ports 2 x 6.3 mm TRS asymmetrically DFX Out Outputs 1 DFX Out Output Ports 6.3 mm TRS USB In/Out In-/Outputs 1 USB In/Out Ports USB-B Max. Unbalanced Stereo Main Out Level 22 dBu Stereo Control Room Out 1 Stereo Control Room Out Connectors 2x 6.3 mm TRS Headphones ouput 1 Headphones outputs 6.3 mm TRS Digital Effects Processor Yes Number of Presets 100 DMX output 1 Footswitch Connector DFX Mute 6.3 mm TS Main section controls 7-band graphic EQ, AUX/DFX Send 1 - 4, DFX Mute, DFX Presets, DFX to Aux, DFX to Main, EQ on/off, GROUP to Main -switch, Main Mix Fader, mains switch, Phantom Power, Phones/CTRL Fader, TK In To Main/To CTRL Indicators DFX Peak, DFX to Main, PFL indicator, Phantom Power, Power, Signal Power supply 100 V AC - 240 V AC, 50 - 60 Hz Width 712 mm Height 80 mm Depth 425 mm Weight 9,442 kg Levertijd 2 a 3 werkdagen

€193.00

LD Systems VIBZ 6 D 6-Channel Mixing Console with DFX 6-channel mixer with 16 digital effects 2 microphone channels with 3-band EQ 2 mono-compatible stereo line channels with 2-band EQ Master, Monitor and headphone outputs Securely fastening external power supply Product type Mixers Type Live Channels 6 AUX / Effects Send Channels 1 AUX / Effects Send Connectors 6.3 mm stereo jack unbalanced Stereo AUX Return Channels 1 x stereo Stereo AUX Return Connectors 2 x 6.3 mm TRS Stereo Tape Out Channel 1 x stereo Stereo Tape Out Connectors 2 x RCA (Cinch) Stereo Tape In Channel 1 x stereo Stereo Tape In Connenctors 2 x RCA (Cinch) Unbalanced stereo Main Outputs 1 Unbalanced stereo Main Output Connections 6.3 mm TRS Unbalanced Stereo Main Out Impedance 120 Ohm(s) Max. Unbalanced Stereo Main Out Level +20 dBu Stereo Control Room Out 1 Stereo Control Room Out Connectors 6.3 mm stereo jack unbalanced Headphones ouput 1 Headphones outputs 6.3 mm TRS Digital Effects Processor Yes, 24-bit AD/DA Resolution Number of Presets 16 Footswitch Connector DFX Mute 6.3 mm TRS Main section controls 2-track Assignment (Main, Contr. Room), 2-track In Volume, DFX Mute Schalter, DFX Presets, DFX To Main Volume, Master Volume, Phantom Power, Phones / Control Room Volume, Stereo Return Volume Indicators 4-segment Level Meter, Channel Peak, DFX Peak / Mute, Phantom Power, Power Power supply 18V DC - 1 A, External PSU, 230 V Width 209 mm Height 68 mm Depth 260 mm Weight 1,4 kg Levertijd: Eind februari

€325.00

LD Systems ZONE 622 19" 2-Zone Mixer 1U The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations. The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface. The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622. Product type Mixers Type Installations Number of Zones 2 (Master, Zone) Type stereo Installation Height 1 U Total Input Channels 8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH) Frequency response 20 - 40000 Microphone channels 2 (with phantom power 12 V) Microphone Channel Connections 6.3 mm stereo jack (balanced) Microphone channel controls 1 x EQ Hi, 1 x EQ Low, 1 x Talk Over Damp, 1 x Talk Over Level, Gain, On / Off Microphone Channels Display Elements On-LED Microphone Channels Input Impedance 4 kOhm Microphone Channels Input Sensitivity 6.1 mV Microphone Channels THD 0.08% Line / Microphone Channels 2 Line / microphone input connectors 2 x RCA, 3.5 mm stereo jack (input 1), 6.3 mm stereo jack (balanced) Line / microphone channel controls Cue, level, mic/lline, Trim Line / Microphone Display Elements Cue-LED, Signa-LED Line Channels 3 Line input connectors Input 3-4: 2 x RCA, Input 5: 2 x RCA + USB Line Channel Controls Cue, level, Trim Line Channel Display Elements Cue-LED, Signa-LED Line Channel Input Impedance 4 kOhm Line Channels Input Sensitivity 1.5 V Line Channels THD 0.03% input sensitivity AUX/Line 3 V FOH Channels 1 FOH Input Connections 6.3 mm stereo jack (2 x balanced) FOH Input Controls Cue, level FOH Input Display Elements Cue-LED, Signa-LED Line outputs 3 (Master - Stereo, Zone - Mono, Rec - Stereo) Output Connectors Master 6.3 mm stereo jack (2 x balanced), RCA (x2), Terminal block Levertijd 2 a 3 werkdagen

€241.50

LD Systems VIBZ 10 C 10 Channel Mixing Console with Compressor 10-channel mixer with 4 microphone channels 4 stereo line inputs Effective 3-band EQ 2 stereo channels with 2-band EQ Sliding adjustable compressor Master, Monitor and headphone outputs Securely fastening external power supply Product type Mixers Type Live Channels 10 AUX / Effects Send Channels 1 AUX / Effects Send Connectors 6.3 mm stereo jack unbalanced Stereo AUX Return Channels 1 x stereo Stereo AUX Return Connectors 6.3 mm TRS Stereo Tape Out Channel 1 x stereo Stereo Tape Out Connectors 2 x RCA (Cinch) Stereo Tape In Channel 1 x stereo Stereo Tape In Connenctors 2 x RCA (Cinch) Unbalanced stereo Main Outputs 1 Unbalanced stereo Main Output Connections 6.3 mm TRS Unbalanced Stereo Main Out Impedance 120 Ohm(s) Max. Unbalanced Stereo Main Out Level 20 dBu Stereo Control Room Out 1 Stereo Control Room Out Connectors 6.3 mm TRS Headphones ouput 1 Headphones outputs 6.3 mm TRS Digital Effects Processor No Main section controls 2-track Assignment (Main, Contr. Room), 2-track In Volume, Master Volume, Phantom Power, Phones / Control Room Volume, Stereo Return Volume Indicators Phantom Power, Power Power supply 18V DC - 1 A, External PSU, 230 V Width 265 mm Height 78 mm Depth 352 mm Weight 2,3 kg Levertijd 2 a 3 werkdagen

€265.95

LD Systems VIBZ 8 DC 8 Channel Mixing Console with DFX and Compressor 8-channel mixer with 100 digital effects presets 4 microphone channels and 3 stereo line inputs Effective 3-band EQ Sliding adjustable compressor Master, Monitor and headphone outputs Securely fastening external power supply Product type Mixers Type Live Channels 8 AUX / Effects Send Channels 1 AUX / Effects Send Connectors 6.3 mm stereo jack unbalanced Stereo AUX Return Channels 1 x stereo Stereo AUX Return Connectors 2 x 6.3 mm TRS Stereo Tape Out Channel 1 x stereo Stereo Tape Out Connectors 2 x RCA (Cinch) Stereo Tape In Channel 1 x stereo Stereo Tape In Connenctors 2 x RCA (Cinch) Unbalanced stereo Main Outputs 1 Unbalanced stereo Main Output Connections 6.3 mm TRS Unbalanced Stereo Main Out Impedance 120 Ohm(s) Max. Unbalanced Stereo Main Out Level 20 dBu Stereo Control Room Out 1 Stereo Control Room Out Connectors 6.3 mm TRS Headphones ouput 1 Headphones outputs 6.3 mm TRS Digital Effects Processor Yes, 24-bit AD/DA Resolution Number of Presets 100 Footswitch Connector DFX Mute 6.3 mm TRS Main section controls DFX Mute Schalter, DFX Presets, DFX To Main Volume, Master Volume, Phantom Power, Phones / Control Room Volume, Stereo Return Volume Indicators 8-segment Level Meter, Channel Peak, DFX Peak / Mute, Phantom Power, Power Power supply 18V DC - 1 A, External PSU, 230 V Width 265 mm Height 78 mm Depth 352 mm Weight 2,3 kg Levertijd: Half april 2024

€545.00

LD Systems ZONE 624 19" 4-Zone Mixer 3U LD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote- controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas. The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface. The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing. Product type Mixers Type Installations Number of Zones 4 (Master, Zone A-C) Type stereo Installation Height 3 U Total Input Channels 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line Frequency response 20 - 40000 Microphone channels 2 (with phantom power 12 V) Microphone Channel Connections 6.3 mm stereo jack (2 x balanced), XLR Microphone channel controls 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1x EQ Mid, 2 x gain, 2x On/Off Microphone Channels Display Elements On-LED Microphone Channels Input Impedance 4 kOhm Microphone Channels Input Sensitivity 4.5 mV Microphone Channels THD 0.08 % Line Channels 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line 4: Line, Input 6: Line/FOH Line input connectors input 2, 4 5: 2 x RCA, Input 1: 2 x RCA + 3.5 mm stereo jack, input 3: 2 x RCA + USB, input 6: 4 x RCA + 2 x 6.3 mm jack Line Channel Controls 2x Phono/Line, AUX enable, Cue, FOH On, Gain, level Line Channel Display Elements Cue-LED, Signal/0 dB-LED Line Channel Input Impedance (Phono) 50 kOhm, 6 kOhm Line Channels Input Sensitivity (Phono) 25m V, 2.1 V Line Channels THD (Phono) 0.05%, 0.02% Levertijd 2 a 3 werkdagen

€217.00

LD Systems MS 828 19" 8-Channel Splitter/Mixer LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8 The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications. The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions. TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment. Product type Mixers Type Installations Channels 8 Mono input channels, line 6 Mono line input connectors 2 x 6.3 mm TS Mono line input type Electronically balanced Stereo Line Input Channels 1 Stereo Line Input Connectors 2 x XLR Stereo Line Input Type Electronically balanced Input impedance (balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s) Max. input level + 21 dBu Nominal working level -10 dBV - +4 dBu Mono output channels 6 Mono output connectors 2 x 6.3 mm TS Mono output type Electronically balanced Stereo output channels 1 Stereo output connectors 1 x XLR Stereo output type Electronically balanced Output impedance (balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s) Max. output level +22 dBu Frequency response 5 - 40000 THD 0.0008 % S/N Ratio 85 dB Controls Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6 Indicators In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power Operating voltage 220 V AC - 240 V AC, 50-60 Hz Mains connector IEC power connector Power consumption 15 W Fuse T 315 mAL, AC 250V Width 483 mm Height 44.5 mm Depth 216 mm Weight 3 kg Accessories (included) Power cord Levertijd 2 a 3 werkdagen